One wall (mostly) in the bag, NEXT wall!

This weekend was full of gorgeous good weather and lots of sunshine - but not too much. We basked in the sun and we reveled in the fact that we'd have an entire extra hour of daylight on Sunday!

On Saturday, the most excellent other half installed the bathroom heater - leaving the wiring for me. I worked on pulling a wire from one side of the crawlspace opening to the other:

This is what took up the bulk of my Saturday. For real. I ran the cable from the opening on the left through the ceiling/wall space above that little closet to the great big hole that I knocked in the wall on the right, then down to the proper hole. The hole only had to be so big because the stupid plaster had broken down behind the wall and nothing could push the lumps out of the way without more access. Argh. Next weekend: hole patching.

On Sunday, Awesome Man laminated thin plywood sheets to the studs and support beams so that the wall patch will match the plaster in thickness, and then I installed the box and stapled the cables.

He spent a good deal of time making perfect drywall hot patches to go around the heater he had put in on Saturday. It looks pretty sweet.
 

Also on Sunday, we went from this:

To this:

The bench top WAS on initially, but I didn't take a photo of that. Taking it off was quite a hassle, but we did it without making any cuts (except in the nails), and I'm quite pleased with us. I'm very happy with this progress because I've been wondering for months how I was going to get electricity over to this side of the room. We're almost ready to paint in here.

Can anyone tell me WHY the wood smelled like feces when I started cutting into it? It was strong and very unpleasant and it created a cloud of yuck that gave me a migraine before I left.

I've also finally developed an excellent way to get romex into old work romex boxes with a) the right amount of insulation inside the box and b) without nicking any wires, thanks to my Klein K1412. I use this tool to cut through the outer sheathing of the cable exactly where I want the sheathing to end inside the box, then pull it halfway off and pull the paper from between the wires. After that, I push the sheathing back onto the wires and pull it through the box clamp. Once it's through, I slide the sheathing back off again and YAY! Perfect, undamaged wire insulation.